Vivara Pro Cambridge Swift Maxi Nesting Block

This woodstone Cambridge swift nest block is designed to be built into the cavity of an external wall, a bricked front can be used with the swift entrance hole being built to approx 30mm x 65mm in the fascia.

The red entrance brick or buff entrance brick are designed to be built across the front of the cavity area to fit discreetly with the design of the building.

Construction of this is easy as this maxi nesting cavity is standard UK block width of 440mm and the entrance bricks are standard UK brick width of 215mm.

Concrete construction means this will be a low cost, long term solution to creating an ideal home for a Swift.

• The Cambridge Swift Maxi block is easy to fit into the wall cavity and is a standard UK block width of 440mm.
• It has 4 nesting pans so it doesn’t matter which way up it is fitted
• The entrance bricks are standard UK brick sizes so involve no cutting to fit.
• We suggest using a DPC or waterproof sealant around the maxi block to avoid any possible water ingress
• Preferably install the built in block into the gable end on the north or east side of the building 3 courses down from the top. This gives an ideal height for the block and is an area where there will be little disturbance from humans. Keep the flight path of the nesting box clear so do not allow trees or shrubs to grow in front of the wall. Swifts likes to breed in colonies, therefore it is advisable to build in several building blocks together. The distance between the mounting the blocks must then be at least 40 centimetres. No nesting material needs to be added. The recommendation is that you should place a minimum of 1 block per new dwelling so on a 30-house development you would have 30 blocks on the site.

Maintenance:
Swifts use little nest material and do not make dirty marks on the façade.

Dimensions:
Height: 215mm
Width: 440mm
Depth: 250mm

Weight:
11kg approx.